The Zemax Knowledgebase is moving!
On August 1, 2025, our articles will only be available on Ansys Optics. As they become available, use the new URL listed at the top of an article to update your bookmarks.Note: Ansys Optics is in English only. If a translation is available on an individual article, it will be listed below the article title.
Learning Paths
- Getting Started with OpticStudio
- Imaging System Fundamentals
- Illumination Systems Fundamentals
- Modeling Laser Beam Propagation in OpticStudio
- ZPL Programming
- Getting Started with ZOS-API
Lasers
- How to convert from Lumerical simulations to OpticStudio and back
- STOP Analysis of high-power laser systems - part 5
- Introduction to STAR Stress Birefringence
- STOP Analysis of high-power laser systems - part 3
- STOP Analysis of high-power laser systems - part 4
- STOP Analysis of high-power laser systems - part 2
HUD & AR
- Birdbath architecture for augmented reality (AR) system - part 1-System setup, optimization, and human vision simulation
- Automated Export of Zemax Dynamic LSWM DOE to JSON Data for Usage with Static-LSWM and/or Ansys Speos
- Head-up Display projection system: from Speos to OpticStudio - part2
- Head-up Display projection system: from Speos to OpticStudio - part1
- Simulation of Volume Holographic Grating Using Rigorous Coupled-Wave Analysis Method
- Birdbath architecture for augmented reality (AR) system - part 2 – Accurate polarizing element simulation
Illumination Systems
- Infrared thermometer and thermal camera simulation using OpticStudio
- How to model the human skin and optical heart rate sensors in OpticStudio
- How to use Luminit's LSD model in OpticStudio - webinar
- Designing a flood light with OpticStudio's Part Designer
- Fly’s eye arrays for uniform illumination in digital projector optics
- Modeling Photoluminescence in OpticStudio: A Photoluminescent Solar Concentrator
Imaging Systems
- From Concept to CubeSat Part 1: Using Ansys Zemax Software to Develop a CubeSat System
- Designing Cell phone Camera Lenses Part 2: Optomechanical Packaging
- STAR Symmetry Tool
- Using the Export to Speos Lens System tool
- Designing Cell phone Camera Lenses Part 1: Optics
- From Concept to CubeSat Part 3: Using the Ansys Zemax Software Suite to Develop a CubeSat System
Lens Design
- Realistic modeling of relief-type diffractive intraocular lenses using User-Defined Surface DLLs
- How to design DOE lens or metalens in OpticStudio
- Mechanics of an Ansys Workflow: OpticStudio - Speos - Creo Parametric
- Designing Cell phone Camera Lenses Part 4: Impact Performance Analysis with LS-DYNA
- Paraxial vs. Real pupils in optical system
- Attaching Interferograms to Optical Surfaces in OpticStudio